Tensioning belt made of special low-stretch band with zinc diecast clamping buckle.
Length 320 cm (suitable for thick oaks + beech).
Advantages Tensioning straps with clamping buckles:
- Light weight (approx. 115g)
- Easy to throw around the tree
- Fast assembly and disassembly
- Good clamping performance
- In the price
- Unobtrusive on the tree
- No risk of injury to the buckles
- F adm. 250 daN
When selecting our tensioning straps, we place high demands on the quality of the strip material, the clamping buckle and the steel frame. Functionality is also at the forefront.
The tape material is made of high-quality polyester fabric with a high UV stability and is therefore suitable for long-term, permanent use on the trees.
It has the desired stiffness to easily correct a twisted band behind the tree. The band ends are diagonally cut to allow simple threading.
The production is carried out according to DIN EN 9001: 2000 and ISO / TS 16949: 2002
The seam is designed according to the guidelines for obtaining the GS test mark.
The clamping jaw has no protruding, injury-prone excesses.
Safety information: Not suitable for self-assurance.
This is a recommendation of TÜV Süd. If a climber improperly fastened to the tensioning straps and provoked an accident, we can provide the operators of the system with appropriate safety instructions with possible liability claims.
We can not assume any product liability when using non-product tensioning straps!
|Age rating||No age restriction|
|Net weight||0 g|